HM24 series

Output up to 2kV 2.5W

Features

High-Voltage-Supply HM24
  • Exeptional Low Noise, High Stability
  • Lowest Noise to Below 1Hz
  • Analog Programmable
  • Voltage and Current Monitor
  • Protected Against Arc and Short Circuit
  • Very Compact Package, Chassis Mountable
  • 6-sided Metal Shielding
  • High Performance, Low Cost
  • Made in Germany

 
Applications

  • Photomultipliers, Phototubes
  • GM Tubes, Radiation Counters Tubes
  • Mass Spectrometry
  • Electron Beam / Ion Beam

 
The HM24 Series is a family of ultra low noise, high voltage, high performance power supplies. Analog programming and monitor outputs for output voltage and output current are provided.

Output can be controlled by using either an external control voltage or external potentiometer. A very low noise reference voltage output is available. The output voltage is directly proportional to the programming voltage. It features outstanding linearity.

Load regulation is excellent and the output voltage is independent from the input supply voltage. The output is not isolated. High voltage return is internally connected to ground (GND).

The power supply modules are protected against arc and short circuit.

Model Overview

Output Voltage Max. Output Current Positive Polarity Output Model Negative Polarity Output Model Ripple
(>5kHz)
Noise
(1Hz-5kHz)
0 – 0.3 kV 8 mA HM24-0.3P-24 HM24-0.3N-24 1 mVp-p 4 mVp-p
0 – 0.6 kV 3 mA HM24-0.6P-24 HM24-0.6N-24 1 mVp-p 4 mVp-p
0 – 1 kV 2.5 mA HM24-1P-24 HM24-1N-24 1 mVp-p 4 mVp-p
0 – 1.5 kV 1.5 mA HM24-1.5P-24 HM24-1.5N-24 1 mVp-p 4 mVp-p
0 – 2 kV 1 mA HM24-2P-24 HM24-2N-24 1 mVp-p 4 mVp-p
Disclaimer

The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.

Safety Advice

Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!