GP series

Output up to 6kV 1W

GP_Series.pdf
high-voltage-supply GP

Applications:

  • Portable, Battery Powered Applications
  • Sustaining Ion Pumps
  • Vacuum Gauges
  • Photomultiplier Tubes
  • Spectrometry, Electrostatic Chucks, Lamp Ignition
  • Displays, Non-impact Printers
  • Electrostatic Field Generation, Avalanche Photodiodes
  • Piezo Devices, Electrophoresis


Features:

  • Low Power Consumption
  • Small Case Size
  • Light Weight
  • Low EMI/RFI
  • Input/Output Isolation (Floating Output)
  • Center Tap Option
  • Low Cost / High Performance
  • MTBF: >2.31 million hrs per Bellcore TR-332

The GP Series is a line of miniature, DC to HV DC converters providing 0.2kVDC to 6kVDC, positive or negative, in a compact PCB mount package.
This line features low power consumption, making it ideal for portable, battery powered applications.
The isolated output is proportional to the input, and is linear from approximately 0.7V in.
A low noise quasi-sinewave oscillator and shielded transformer provide clean, reliable DC to HV DC conversion with low EMI and RFI. The isolated output allows for user selectable output polarity.
No minimum load is required.

Model Overview

Model Output *3
Voltage		 Output *5
Current		 Input Voltage Input *2
Current
(No Load)		 Input *2
Current
(Full Load)		 Ripple
GP02 0 - 0.2kV 5mA 0 - 12V <45mA <150mA <1.75%
GP03 0 - 0.3kV 3.3mA 0 - 12V <45mA <125mA <0.50%
GP05 0 - 0.5kV 2mA 0 - 12V <15mA <125mA <0.50%
GP06 0 - 0.6kV 1.67mA 0 - 12V <15mA <125mA <0.50%
GP12 0 - 1.2kV 840μA 0 - 12V <25mA <125mA <0.75%
GP15 0 - 1.5kV 660μA 0 - 12V <20mA <125mA <0.75%
GP25 0 - 2.5kV 400μA 0 - 12V <30mA <130mA <1.00%
GP30 0 - 3kV 340μA 0 - 12V <40mA <130mA <1.00%
GP40 *1 0 - 4kV 250μA 0 - 12V <50mA <130mA <1.00%
GP50 *1 0 - 5kV 200μA 0 - 12V <75mA <150mA <1.50%
GP60 *1 0 - 6kV 167μA 0 - 12V <85mA <175mA <1.00%

*1 Caution: Models GP40, GP50 & GP60 do not have internal bleeder resistors on the output.
      Provisions must be made externally to discharge the output capacitors if this feature is desired.
*2 At maximum rated output voltage.
*3 Output Voltage is load dependent. Under light or no load conditions, reduce input
      voltage so maximum rated output voltage is not exceeded.
*4 Specifications after 30 minutes warm-up, full load, at 25°C unless otherwise noted.
*5 The rated output current is available at full output voltage and derates
      proportionally as the input voltage decreases.


SPECIFICATIONS
 
Input Voltage: See table
Typical Turn-On Voltage: 0.7VDC
Output Voltage Tolerance
(Full Load, 12V in, +25°C):
+3%, -3%
Output Current: See table
Ripple: See table
Operating Temp: -20°C to +70°C
Storage Temp: -20°C to +105°C
Load Regulation: <10% (No Load to Full Load)
Isolation: 3.5kV (Input to Output)
Weight: 43g approx.
Pins: 0.79mm Diameter,
5.1mm Long
OPTIONS
-R RoHS compliant
 
Disclaimer

The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.

Safety Advice

Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!