E series

Output up to 8kV 3W

high-voltage-supply e 3

Applications:

  • Electro-Static Field Generation, HV Op Amps
  • Grid Bias, Spectrometry, Piezo Devices, Lamp Ignition
  • Q Switches, Ion Pumps
  • Capacitor Charging, Electrophoresis
  • Image Intensifiers, Printers


Features:


  • Low Ripple, Low EMI/RFI
  • Proportional Input / Output
  • Exceptional Reliability
  • Compact, PCB Mount Package
  • Input/Output Isolation (Floating Output)
  • Center Tap Option
Model Output Voltage Output Current Input Voltage Input Current
(No Load)
Input Current
(Full Load)
Ripple
E02 0 - 0.2kV 15mA 0 - 12V <175mA <400mA 0.25%
E02-5 0 - 0.25kV 12mA 0 - 12V <175mA <400mA 0.75%
E03 0 - 0.3kV 10mA 0 - 12V <175mA <400mA 1.0%
E05 0 - 0.5kV 6mA 0 - 12V <175mA <400mA 0.1%
E06 0 - 0.6kV 5mA 0 - 12V <175mA <400mA 0.1%
E07-5 0 - 0.75kV 4mA 0 - 12V <175mA <400mA 0.1%
E08 0 - 0.8kV 3.7mA 0 - 12V <175mA <400mA 0.1%
E10 0 - 1kV 3mA 0 - 12V <175mA <400mA 0.05%
E12 0 - 1.2kV 2.5mA 0 - 12V <175mA <400mA 0.05%
E15 0 - 1.5kV 2mA 0 - 12V <175mA <400mA 0.05%
E20 0 - 2kV 1.5mA 0 - 12V <175mA <400mA 0.25%
E30 0 - 3kV 1mA 0 - 15V <175mA <400mA 0.25%
E40 0 - 4kV 0.75mA 0 - 15V <175mA <400mA 0.5%
E50 0 - 5kV 0.6mA 0 - 15V <175mA <400mA 0.5%
E60 0 - 6kV 0.5mA 0 - 15V <175mA <400mA 0.5%
E70* 0 - 7kV 0.43mA 0 - 15V <175mA <400mA 1%
E80* 0 - 8kV 0.25mA 0 - 15V <175mA <400mA 1.25%

* This unit has flying leads on the output and  clearance holes for mounting

Center tapped units supply both polarities with respect to a center-tap return
(e.g. E02CT: 0 to ±100VDC)

 
SPECIFICATIONS
 
Input Voltage: See table
Typical Turn-On Voltage: 0.7 Volts
Output Voltage: See table
Output Current: See table
Ripple: See table
Isolation: 3.5kV +Vout
  E70-E80: 500V +Vout
Efficiency: >60% Typical
Regulation: 10% Typical
Operating Temp: -10°C to +60°C
  E70-E80: -10°C to +50°C
Weight: 85 grams approx.
Packaging: Fully Encapsulated
Case Material: Diallyl Phthalate (DAP)
Pins: 0.79mm Dia.,
5.1mm Min. Length
 
 
OPTIONS
 
AB Shielding and Mounting Enclosure
B Alternate Pin Pattern
CT Output Center Tap
 
Low Outgassing Epoxy
 
Disclaimer

The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.

Safety Advice

Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!