GEN10kW / GEN15kW series

PROGRAMMABLE HIGH POWER DC-POWER SUPPLIES

programmierbares DC-Netzteil GEN10kW

The Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications.
Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 1500V, and current up to 1,000A. Active PFC, and universal input head a long list of standard features.
GenesysTM 10/15kW includes several important new features and options. Up to four like units may be connected in parallel and user configured for the Master to Program and Monitor the total current of the group. Thus, four units can appear as a single 60kW power supply, increasing flexibility for system designers. In the Digital Options, a new option called Multi-Drop allows an IEEE Multi-Drop Master to control Multi-Drop equipped Slaves over RS-485, avoiding the cost of a GPIB board in every slave power supply. Up to 31 may be addressed over the RS-485 lines of Master and Slaves.
Approvals: UL Recognized and CE Mark for LVD and EMC Regulation (208VAC and 400VAC Input)

Model Overview 10kW

GEN 7.5-1000 10-1000 12.5-800 20-500 25-400 30-333 40-250 50-200
Vout (VDC) 7.5 10 12.5 20 25 30 40 50
Iout (ADC) 1000 1000 800 500 400 333 250 200
GEN 60-167 80-125 100-100 125-80 150-66 200-50 250-40 300-33
Vout (VDC) 60 80 100 125 150 200 250 300
Iout (ADC) 167 125 100 80 66 50 40 33
GEN 400-25 500-20 600-17 800-12.5 1000-10 1250-8 1500-6.7
Vout (VDC) 400 500 600 800 1000 1250 1500
Iout (ADC) 25 20 17 12.5 10 8 6.7

Model Overview 15kW

GEN 30-500 40-375 50-300 60-250 80-187.5 100-150 125-120 150-100 200-75
Vout (VDC) 30 40 50 60 80 100 125 150 200
Iout (ADC) 500 375 300 250 187.5 150 120 100 75
GEN 250-60 300-50 400-37.5 500-30 600-25 800-18.8 1000-15 1250-12 1500-10
Vout (VDC) 250 300 400 500 600 800 1000 1250 1500
Iout (ADC) 60 50 37.5 30 25 18.8 15 12 10
SPECIFICATIONS

Input voltage/freq. (*1): 208VAC (180-253); 400VAC (360/440); 480VAC (432-528), all 47-63Hz.
Number of phases: 3 Phase (Wye or Delta) 4 wire total (3 Phase and 1 protective earth ground)
Dropout voltage: 180V / 360V / 432V
Input current 180/360/432VAC: 10kW - 45A / 23A / 20A; 15kW - 64A / 32A / 27A; All at full rated output power.
Power Factor: 0.88 Passive
Leakage current: 3.5 mA (EN60950) max.
Input Protection: 208 VAC Circuit Breaker; 400VAC, 480VAC - Line Fuse
Input Overvoltage Protection: Unit shall not be damaged by line overvoltage with max. duration of 100µs up to 120% of nominal AC input voltage.
Parallel Operation: Up to Four (4) identical units may be connected in Master/Slave Mode with 'Single' wire connection. In Advanced parallel feature, the current of Master Unit, multiplied by number of units connected in parallel, is made available on digital interface and displayed on front panel of Master unit. Remote analog current monitor of the Master is scaled to output current of the Master unit (only).
Series Operation: Possible (with external diodes) , up to identical 2 units with total output not to exceed +/-600V from chassis ground.
Operating temp.: 0°C - 50°C, 100% load
Storage temp.: -20°C - 70°C
Operating humidity: 20 - 80% RH (no condensation)
Storage humidity: 10 - 90% RH (no condensation)
Audible Noise: 65dBA at Full Load, measured 1m from Front Panel
Cooling: Fan driven, Airflow from Front to Rear. Supplemental vents on side that shall not be blocked. EIA Rack mounting, stackable. "Zero Stackable" top and bottom. Slides or suitable rear support required.
Dimensions (WxHxD): 19" Rack x 3U - 133mm x 564mm without connectors.
Weight: 43kg
Input connector: Threaded Studs and terminal cover. Strain relief optional.
Output connectors: Up to and including 300V Models: bus-bars. Greater than 300V Models: threaded stud terminals

Options:

  • GPIB (Multi-Drop Master) Interface P/N: IEMD
  • Multi-Drop Slave Interface P/N: MD
  • Voltage Programming Isolated analog interface P/N: IS510
  • Current Programming Isolated analog interface P/N: IS420
  • LAN Interface (Complies with LXI Class C) P/N: LAN
  • USB Interface P/N: USB

 

Accessories:

Communication cable
RS-232/RS-485 cable is used to connect the power supply to the Host PC

Mode RS485 RS232 RS232
  PC Connector   DB-9F   DB-9F   DB-25F
  Communication Cable   Shield Ground L=2m   Shield Ground L=2m   FShield Ground L=2m
  Power Supply Connector   EIA/TIA-568A (RJ-45)   EIA/TIA-568A (RJ-45)   EIA/TIA-568A (RJ-45)
P/N GEN/485-9 GEN/232-9 GEN/232-25

Serial link cable*
Chaining Power Supply to Power Supply up to 31 units

Mode Power Supply Connector Communication Cable P/N
RS485 EIA/TIA-568A (RJ-45) Shield Ground L=50cm GEN/RJ45

* Included with the power supply