Passive Probes


Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.

Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.
 

Model Overview

Model Bandwidth Input R Input C Attenuation Maximum Voltage Diameter Recommended Oscilloscope
PP005A 500 MHz 10 MΩ 11 pF 10:1 500 V 5 mm 1, 2, 12, 13
PP006A 500 MHz 10 MΩ 12 pF 10:1 600 V 5 mm 3, 11
PP007-WS 500 MHz 10 MΩ 9.5 pF 10:1 400 V 2.5 mm 4
PP007-WR 500 MHz 10 MΩ 9.5 pF 10:1 400 V 2.5 mm 5, 7, 9
PP008 500 MHz 10 MΩ 9.5 pF 10:1 400 V 2.5 mm 4, 6, 8
PP009 500 MHz 10 MΩ 9.5 pF 10:1 400 V 5 mm 4, 6, 8
PP010 200 MHz 10 MΩ 12.5 pF 10:1 600 V 5 mm 10
PP011 500 MHz 10 MΩ 9.5 pF 10:1 400 V 5 mm 5, 7, 9
PP013 60 MHz/15 MHz 10 MΩ/1 MΩ 15 pF/46 pF 10:1/1:1 600 V 5 mm 14
PP014 100 MHz/15 MHz 10 MΩ/1 MΩ 15 pF/46 pF 10:1/1:1 600 V 5 mm 15
PP016 300 MHz/100 MHz 10 MΩ/1 MΩ 12 pF/46 pF 10:1/1:1 600 V 5 mm 14, 15, 16
   
  Recommended Oscilloscope:  
1 9300 Series  9 WaveSurfer Xs Series (1 GHz)
2 LC Series 10 WaveJet Series (≤ 200 MHz)
3 LT Series 11 WaveJet Series (≥ 350 MHz)
4 WaveSurfer 400 Series 12 WavePro 900 Series
5 WaveRunner 6000 Series 13 WavePro 7000 Series
6 WaveRunner Xi Series (≤ 600 MHz) 14 WaveAce Series (60 MHz)
7 WaveRunner Xi (1 GHz - 2 GHz) 15 WaveAce Series (100 MHz)
8 WaveSurfer Xs Series (≤ 600 MHz) 16 WaveAce Series (= 200 MHz)