Fiber Optic Interfaces

fiber-optic-interface F422-G

An interface module to convert the electrical signal of RS-422-B for an interference free data transmission via optical fibers.
The possible link distance exceeds 500m when using 200μm glass fiber cable and 75m when using 1mm plastic fiber cable.
For RS-422-B a 8 way RJ45 connector is used and the external power supply has a 4 way RJ11 connector.
The F422-G can be configured using internal jumpers, eg. as DCE or DTE device.

fiber-optic-interface LIMO-G

An interface module to convert the electrical signal of RS232-C (V24) for an interference free data transmission via optical fibers.
The possible link distance exceeds 500m when using 200μm glass fiber cable and 75m when using 1mm plastic fiber cable.
With its low power consumption the 25-pole connector can be plugged directly into a DCE or DTE connector without an external supply.
According to the specific requirements the LIMO-G is configured using internal jumpers.
For a 9-pole connector an adapter is available.

fiber-optic-interface UN series

Fiber optic connectors for serial, asynchronous and full duplex data transfer are available for 9-pole socket connector layout.
An external power supply is not essential.
Using these connectors at both ends, you can assembly a low cost and reliable link without special tools.

USB ROVER 200

An USB 1.1 device that extends the range of USB up to 40 meters over fiber optic cable. Using four strands of multimode fiber, it provides exceptional reliability and immunity to interference including complete electrical isolation between computer and device. Ground loops between the devices are eliminated.
The system includes a Local Extender (LEX) unit, a Remote Extender (REX) unit, an integrated fiber optic cable, international power adapter and user guide.